Best prices on all tech products are here. Cash on Delivery plus pay safely with MPU, Visa, Master, JCB, UnionPay, KBZPay, WavePay, OnePay, MyTelPay & more.

Brand new product, full warranty and services. This makes it impossible to use true hybrid ports where the access VLAN would be tagged internally, but you can make use of the fact that tagless frames may exist internally to have pseudo-hybrid ports for one 'tagless VLAN' while the rest of VLANs are tagged, and still have hardware switching. Buy MikroTik RB750Gr3 hEX Gigabit Ethernet Router at the best price in Myanmar (Burma). On Atheros8227, the VLAN support is weird in terms that it cannot selectively untag only frames belonging to port's pvid on egress. interface bridge set bridge vlan-filtering=yes So the same configuration with VID 1 used instead of VID 10 should look the following, but it is without any warranty and you have to test yourself:Īdd bridge=bridge interface=ether2 pvid=1Īdd bridge=bridge interface=ether3 pvid=20Īdd bridge=bridge interface=ether4 pvid=1Īdd vlan-ids=1 untagged=bridge,ether2,ether4Īdd vlan-ids=20 tagged=bridge untagged=ether3Īdd vlan-ids=30 tagged=bridge,ether2,ether4Īdd name=vlan20 vlan-id=20 interface=bridgeĪdd name=vlan30 vlan-id=30 interface=bridgeĪdd address=192.168.88.1/24 interface=bridgeĪdd address=192.168.20.1/24 interface=vlan20Īdd address=192.168.30.1/24 interface=vlan30 But if that pvid value matches the pvid value set on the bridge itself, they get in tagless. Normally, if you set some pvid value in /interface bridge port item, tagless frames get tagged on ingress with the VLAN ID specified this way. Basically it is because Mikrotik supports the idea of 'hybrid' bridge where tagless frames can exist inside the bridge, something you won't find on switches like Cisco Catalyst. Jotne, I wrote the reasons why I've suggested use of VLAN ID 10 instead of VLAN ID 1 in the end of that post. You either get an error message, which means that the 'future' mentioned in that post has not come yet, or you'll get no error message and subsequent print will show the command has changed the settings, which will mean that future is here and the manual has not been updated. So try to configure something like /interface ethernet switch port set ether5 vlan-mode=secure or /interface ethernet switch vlan add vlan-id=20 ports=ether5 switch=switch1. To see a menu item in Winbox/WebFig/sometimes even CLI does not always mean that the feature actually works. So I gave the instruction how to do it in software. Nichky, somewhere on this forum someone of the Mikrotik staff mentioned hardware VLAN support on hEX r3 'in future', but I am unable to find that post now. Where did you find that 7621 switch chip does not support VLANs?

Mikrotik hex rb750gr3